Engineered storage. Configured to your spec.

Fusion-bonded epoxy is the right call for water, raw water, wastewater, and moderate-aggression process service where a 20–30 year service life is acceptable and first cost matters. Stainless is the right call when service chemistry (chlorides, low pH, food-grade, biopharma) demands it, when the lifecycle horizon is 50+ years, or when no recoat over the asset's life justifies the premium. The wrong call — FBE on a chloride-bearing chemical — is how tanks fail in five years.

304 is the default for food, dairy, pharma, and clean industrial service. 316 adds molybdenum, which provides meaningfully better resistance to chloride pitting and a wider chemical-compatibility window. The upgrade pays anywhere chlorides are present (brackish water, brine, seawater, deicing salt exposure, swimming-pool chemistry, certain pharmaceutical processes). If you're unsure, share the service chemistry and we'll spec it.

Instant pricing is order-of-magnitude — typically within ±15% of refined pricing for standard configurations on accessible sites. Variability comes from freight zone, foundation soil conditions, prevailing wage requirements, code complexity (seismic site class, wind speed, snow load), and current steel-market timing. Submission triggers a 24-hour refinement where our engineering team brings the number to a hard quote.

Yes. Every tank ships with PE-stamped foundation, shell, anchor, and accessory drawings. Stamps are state-specific — provide the project state and we'll route through the licensed engineer for that jurisdiction. Standard turnaround for full submittal package is two to three weeks after PO.

Both. We supply tank-only when you've got an erector under contract, and we supply erected when you want a single point of accountability. Coatings, foundations, dome covers, and accessories all bundle. Forensic spec review of existing tanks is also available as a standalone service.

FBE bolted tanks run 16–24 weeks after submittal approval depending on capacity. Stainless lead times depend on plate availability and run 20–28 weeks — longer if 316 plate is constrained in the steel market. We hold domestic carbon steel inventory, which keeps schedule risk lower than offshore-sourced competitors. Submit early if your in-service date is fixed.